Turning the unit ON and OFF, and Adjusting Blower Speed
WARNING! Do not turn this unit on unless you are wearing safety glasses, and have taken precau- tions to be sure it is safe to do so.
1.To turn on unit, be sure it is plugged in. Then move ON/OFF Switch to the “” position.
To turn unit OFF, rotate switch to “O” position.
2.To adjust blower speed, rotate the Speed Control to any of its 6 posi- tions.
Speed Control ON / OFF Switch
WARNING! Never direct blown air toward any person or animal.
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Make sure the ON /OFF Switch (18) is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspec- tion, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of this tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
3.When using this tool as a blower, it is better to have the Mulch Bag removed.
4.When using this tool as a vacuum, the Mulch Bag will periodically fill up. When you notice it is nearly full, stop work, turn OFF the ON /OFF Switch, and unplug the unit from its power source. Remove the Mulch Bag and empty the contents into a suitable container. Then replace the Mulch Bag, reconnect the power supply, and when it is safe to do so, turn the ON /OFF Switch to the ON position and continue working.
5.When using this tool as a vacuum, avoid picking up sticks, twigs, stones, glass or other hard items. Hard items may damage the Fan (19). Sticks and twigs may clog the Blower Tube Assembly.
SKU 91010 | Page 12 |
