Harbor Freight Tools 91494 operating instructions SKU For technical questions, please call

Models: 91494

1 14
Download 14 pages 414 b
Page 6
Image 6

7.Always unplug the Nailer / Stapler from its electrical outlet before performing and inspection, maintenance, or cleaning procedures.

8.Do not load Brad Nails or Staples with the trigger or safety depressed or when plugged into the power outlet. Unintentional firing may occur.

9.Fire fasteners into an appropriate work surface only. Do not attempt to fire fasteners into surfaces too hard to penetrate. Do not drive fasteners on top of other fasteners, or at too steep of an angle. Fasteners can ricochet causing personal injury.

10.Do not fire fasteners too close to the edge of a workpiece. They may split the workpiece and fly free, causing personal injury.

11. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of Cali- fornia) to cause cancer, birth defects or other reproductive harm. Some ex- amples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

12. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

In addition, people with pacemakers should adhere to the following:

-Avoid operating power tools alone.

-Don’t use a power tool with the power switch locked on.

-If powered via a power cord be certain that the tool is properly grounded. A ground fault interrupt (GFCI) system is also a good precaution. This inexpensive device is a good safety measure because it prevents a sustained electrical shock.

-Properly maintain and inspect all tools before use to avoid electrical shock.

SKU 91494

For technical questions, please call 1-800-444-3353.

Page 6

Page 6
Image 6
Harbor Freight Tools 91494 operating instructions SKU For technical questions, please call