SKU 91852 For technical questions, please call 1-800-444-3353. PAGE 22
3. Daily: With a soft brush, cloth, or vacuum, remove all dust and debris from the
Miter Saw. Then, use a premium quality, lightweight machine oil to lubricate
all moving parts except the Saw Blade (4).
4. To replace the Motor Carbon Brushes: It may become necessary at some-
time to replace the
two
Carbon Brushes (26) when the Motor performance de-
creases, or stops working completely. The Carbon Brushes are located on
each side of the Motor Housing (31). To do so, remove the two Brush Holder
Caps (23). Then, remove the two Carbon Brushes from the Brush Holders (25).
If the Carbon Brushes are worn down more than 1/2, replace
both
Carbon
Brushes. If, however, the Carbon Brushes are just dirty they may be cleaned by
rubbing them with a pencil eraser. When installing the Carbon Brushes, make
sure the carbon portion of the Carbon Brushes contact the Motor Armature, and
that the springs face away from the Motor. Also, make sure the springs operate
freely. After cleaning or replacement, replace the Brush Holders.
NOTE: New Carbon Brushes tend to arc or spark when first used
until
they
wear and conform to the Motor’s Armature. (See Assy. Diagram.)
5. NOTE: With the exceptions of Steps #1, #2, #3, and #4 all other mainte-
nance and servicing should be performed
only
by a qualified service tech-
nician.
PLEASE READ THE FOLLOWING CAREFULLYTHE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.