Harbor Freight Tools 91852

SKU 91852 For technical questions, please call 1-800-444-3353. PAGE 26

ASSEMBLY DIAGRAM- CONTINUED

159

NOTE: Part # 143, Battery Box, is located on the bottom of the Arm Holder Complete (Part# 156).

REV 03/06

Contents

Main 12 COMPOUND SLIDE MITER SAW Model 91852 ASSEMBLY AND OPERATING INSTRUCTIONS PRODUCT SPECIFICATIONS SAVE THIS MANUAL GENERAL SAFETY RULES ELECTRICAL SAFETY Page SPECIFIC SAFETY RULES Inspection, Maintenance, And Cleaning Page Class 2 (Califor- nia Health & Safety Code 25249.5, et seq.) GROUNDING Page EXTENSION CORDS Double Insulated SYMBOLOGY V ~ A arrow downward, UNPACKING ASSEMBLY AND OPERATING INSTRUCTIONS Loosen upward deep remove Page Wearing heavy duty work gloves to avoid accidental cuts, downward firmly. shallow To Assemble/Adjust Additional Accessories: The Safety Cover: The Safety Button And Switch Lever: The Laser Assembly: only Adjust The Cutting Depth: The Elbow Dust Chute: outside counterclock- clockwise To Adjust The Miter Angle: To Adjust The Angle Of Cut: tilt Basic Operation: INSPECTION, MAINTENANCE, AND CLEANING two both until PLEASE READ THE FOLLOWING CAREFULLY