4.Turn the Slide Bar (36) so it points to the Pulley (65) and tightens the tension on the Sanding Belt (66). Replace Cover (23) and Screw (26).
5.If needed, adjust the tracking of the Sanding Belt by turning the Adjustment Screw (59).
Cover (23)
Screw (26)
Sanding |
|
| Spindle (24) |
Belt (66) |
|
| |
|
|
| |
Roller (65) |
|
|
|
| Slide Lock (36) |
|
|
|
|
|
Operating Instructions
Controls
Switch (48)
Slide Lock (36)
Loosen Sanding Belt
Adjusting Screw (59)
Sanding Belt Tracking
Brush Cover (41) | Screw (49) | |
Angle Adjust | ||
|
Bracket (22)
Operation
1.Secure the workpiece to be sanded.
2.Loosen Screw (49) and adjust Bracket (22) to the desired angle for sanding.
3.Plug the Line Cord (52) into a GFCI electrical outlet.
4.Always follow all safety instructions and warnings in this instruction manual.
SKU 92158 | For technical questions, please call | Page |
