Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Assembly / Installation
WARNING: The trailer tongue must be square or rectangular in profile for this Jack to mount properly. A rounded tongue will allow the Jack to rotate to the side causing the trailer to fall suddenly, causing potentially serious personal or property injury.
NOTE: Do not drill holes or otherwise damage the trailer tongue when installing this Jack. Failure of the trailer tongue may result.
NOTE: Installing this Jack is most easily done with the Trailer mounted on the towing vehicle hitch.
FIGURE 1
Handle (1) | Tire (18) |
See detail inset in FIGURE 2.
FIGURE 2 | Mounting Bar (20) | |
|
| (1 of 2) |
Hardware Set (19) | Swivel Plate (6) | |
(1 of 4) |
| |
|
| |
Inner Tube (8)
Outer Tube (7)
SKU 92372 | For technical questions, please call | Page 4 |
