Impact Wrench Safety Precautions
1.Disconnect air before servicing. Do not attempt to change sockets, disassemble, or service tool with air hose attached.
2.Use only specified operating air pressure. Never operate tool above the specified operating air pressure range.
3.Do not use combustible gases. Do not use combustible gases as a power source, or use tool in areas where combustible gases are stored.
4.Avoid possible kickback injury. Hold the tool with both hands during operation so that your head and body are not injured by possible kickback of the tool.
5.Use care when transporting tool. Disconnect tool from air supply when moving tool in the workplace. Carry tool only by the handle without drawing the trigger.
6.OSHA Guidelines. Industrial applications must follow OSHA guidelines.
7.Air Compressor. Read and adhere to all warnings and instructions of the Air Compressor Instruction Manual.
Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included.
Impact Wrench
Allen Wrench
| Air Hose |
Cap Screws (50) | Fitting (56) |
|
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
SKU 92622 | For technical questions, please call | Page 4 |
