Use a small amount of pipe compound or teflon tape on the connection threads to prevent leaks. Tighten using a wrench (not supplied).
Caution: Make sure all connections are tight to avoid fuel leaks.
3.Start the engine and immediately check for fuel leaks. If fuel leaks are found, turn engine off and fix leaks.
4.Read the pressure off the Pressure Gauge (1).
5.Turn off the engine and remove the keys from the ignition.
6.Wrap a cloth around the hose connection point before relieving the pressure from the fuel line, and remove testing components.
7.Reconnect vehicle’s fuel injection line.
8.Wipe up any spilled fuel. Dispose of
9.Start the engine and check for leaks. Fix leaks if found.
10.Clean and store Fuel Injection Test Kit components and place in the plastic kit bag.
| Typical Hookup |
| |
Fuel Line | 1/4” Hose (5) | Fuel Line | 3/8” Hose (6) |
From Engine | to Fuel Pump | From Engine | to Fuel Pump |
VW® Hookup
|
|
|
| 1/4” Hose (5) | Connect Directly to | ||
|
|
|
|
|
| ||
Pressure Gauge (1) |
|
|
|
|
| Special Test Outlet on | |
|
|
|
|
|
| Engine | |
|
|
| Fitting (3) |
|
| ||
Screw on Female Swivel |
|
|
|
|
| ||
Coupling to Engine Test |
|
|
|
|
| ||
Fitting |
|
|
|
|
| ||
|
|
|
|
|
|
| Fitting (2) |
|
| Cadillac® | - Bendix® |
| |||
|
|
|
| ||||
Type Hookup
Flex Hose (9)
SKU 92699 | For technical questions, please call | Page 5 |
