Operation

1.Prepare the work piece to be painted according to paint manufacturer’s directions. Prepare your paint mixture according to paint manufacturer’s directions. NOTE: In most cases, paint must be thinned for proper spraying. Be sure to use a thinner recommended by the paint manufacturer.

2.Fill the Paint Cup (35) no more than 2/3 full with your paint mixture. Screw the Reservoir into the Reservoir Cap (32) being sure the Reservoir Seal (33) is in place.

3.Turn on your air compressor, and adjust the regulator to the recommended pressure (20 - 45 PSI).

4.IMPORTANT: Before applying paint to your work piece, test spray a piece of scrap material. In most cases both the paint mixture and spray pattern will have to be adjusted for best results.

5.To spray, squeeze the Trigger (26), as you move the Sprayer past the work material. Release the Trigger (26) at the end of each pass. Repeat until you have proper paint coverage of the work piece.

6.When you have completed painting your project, disconnect the Sprayer from its air pressure source and immediately clean following the directions in the Maintenance section on page 8.

Painting Tips

Successful spray painting is a skill which requires knowledge of your equipment, familiarity with your paint materials and experience. Differences in paints, work materials and environmental conditions make every painting task unique. For best results, practice with your painting mixture on a scrap piece before beginning to paint your work material.

It is critical that the surface be properly prepared before painting. It will be difficult to achieve a satisfactory painted surface if the original surface is dirty, rough or wet.

Paint Mixture:

Each paint mixture will vary. You may use solvent or water based paints. Each of these causes a different paint viscosity, and has a different flow rate and drying time. High viscosity is thick, like syrup. Low viscosity is thin, like water.

SKU 92841

For technical questions, please call 1-800-444-3353

Page 6

Page 5 Page 7
Page 6
Image 6
Harbor Freight Tools 92841 operating instructions Operation, Painting Tips, Paint Mixture
Page 5 Page 7

92841 specifications

Harbor Freight Tools 92841 is a versatile and highly regarded tool in the realm of home improvement and professional-grade applications. Designed with user convenience and efficiency in mind, this product has become a go-to choice for both DIY enthusiasts and seasoned contractors.

One of the standout features of the Harbor Freight Tools 92841 is its robust construction. Built from high-quality materials, this tool is engineered to withstand rigorous use while maintaining its reliability and performance. With a solid frame, it can easily handle heavy loads, making it suitable for various tasks, whether in a garage, workshop, or construction site.

The Harbor Freight Tools 92841 comes equipped with state-of-the-art technologies that enhance its functionality. One of these technologies is its ergonomic design, which ensures comfort during prolonged usage. The handle is crafted to reduce strain on the user’s hands, allowing for extended customization and manipulation without fatigue. This is particularly beneficial for professionals who spend hours on the job, as well as for hobbyists engaged in detailed projects.

Another notable characteristic of the 92841 is its compatibility with various attachments and accessories, which adds to its versatility. Users can easily switch between different functions, allowing the tool to adapt to specific tasks, whether it’s cutting, drilling, or grinding. This multifunctionality means that users can rely on the Harbor Freight Tools 92841 for a wide range of applications, making it a valuable addition to any toolkit.

In terms of performance, the Harbor Freight Tools 92841 delivers consistent and powerful output. Its advanced motor technology provides efficient operation while minimizing energy consumption, making it an eco-friendly choice for users who are conscious of their carbon footprint.

Lastly, affordability is a key selling point for the Harbor Freight Tools 92841. Harbor Freight is known for providing high-quality tools at competitive prices, allowing both hobbyists and professionals to access reliable equipment without breaking the bank. This has made the 92841 an attractive option for many, reinforcing Harbor Freight's reputation as a favored supplier in the tool industry.

Overall, the Harbor Freight Tools 92841 encapsulates durability, versatility, and user-centric design, making it an essential tool for anyone serious about their craft or DIY projects. With its blend of innovative technology and practical functionality, it continues to meet the demands of a diverse range of users.
Top Page Image Contents