Maintenance (continued)
Bleeding and filling the Jack with hydraulic oil.
1.Place the Lift on a flat, level, solid surface.
2.If just filling the Jack, open the Oil Filler Plug (10a) and check the oil. Fill to the top of the Oil Reservoir (9a) with a high quality hydraulic oil if necessary.
3.If bleeding, with the Oil Filler Plug (10a) removed, use one foot to step on and keep the Release Pedal (26) down, while you quickly pump the Foot Pedal (24) ten times. This will bring all the air out of the system. Continue pumping until no more air bubbles appear. Fill to the top of the Oil Reservoir (9a) with a high quality hydraulic oil if necessary. Repeat if necessary.
4.Replace the Oil Filler Plug (10a) .
5.Test the Jack. Make sure it is functioning properly before attempting to lift another load. Pump the Foot Pedal (24) up and down several times, and test the Release Pedal (26) to make sure it is working properly; if not, repeat the above process. If the lift continues to func- tion improperly, have a qualified service technician check the product.
Jack (36) Parts List A
When ordering parts from this list, add the suffix “a” to the number.
Part No. | Description | Qty. | Part No. | Description | Qty. |
1a | Ram Cap | 1 | 21a | Spring | 1 |
2a | Ram | 1 | 22a | Screw | 1 |
3a | Top Sealing Gasket | 2 | 23a | 1 | |
4a | Ram Assembly | 1 | 24a | Screw | 1 |
5a | Ram Gasket | 1 | 25a | Ball | 3 |
6a | 1 | 26a | Spring Plunger | 1 | |
7a | Cylinder | 1 | 27a | Spring | 1 |
8a | Lower Sealing Gasket | 1 | 28a | Screw | 1 |
9a | Oil Reservoir | 1 | 29a | Washer | 1 |
10a | Oil Filler Plug | 1 | 30a | Screw | 1 |
11a | Pedal Release Valve | 1 | 31a | Lower Sealing Gasket | 1 |
12a | Pin | 1 | 32a | Washer | 1 |
13a | Release Valve Rod | 1 | 33a | Lower Spring Retainer | 1 |
14a | 1 | 34a | Pump Cylinder | 1 | |
15a | Release Valve Pin | 1 | 35a | 1 | |
16a | Base | 1 | 36a | Seal | 1 |
17a | Split Cotter Pin | 4 | 37a | Piston Rod | 1 |
18a | Pin | 3 | 38a | Link | 1 |
19a | Steel Ball | 1 | 39a | Handle Socket | 1 |
20a | Spring Plunger | 1 | 40a | Top Spring Retainer | 1 |
|
|
| 41a | Spring | 1 |
SKU 93033 | For technical questions, please call | Page 7 |
