Harbor Freight Tools operating instructions SKU 93211 For technical questions, please call

7.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

8.Use eye and ear protection. Always wear ANSI-approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips.

Wear an ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. The included eye guard is intended to supplement eye protection, NOT replace it.

9.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.

10.Maintain tools with care. Keep tools sharp and clean for better and safer per- formance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.

11.Disconnect power. Unplug tool when not in use.

12.Remove adjusting keys and wrenches. Check that adjusting wrenches are removed from the tool or machine work surface before plugging it in.

13.Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before plugging in.

14.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.

15.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.

16.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.

17.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

18.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use ac-

SKU 93211 For technical questions, please call 1-800-444-3353. Page 3