9.Do not operate product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product.
10.Use eye protection. Always wear ANSI approved impact safety goggles.
11.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
12.Do not force this product. Do not use inappropriate attachments in an attempt to exceed the Sweeper’s capacity.
13.Keep children away. Children must never be allowed in the work area. Do not allow children to play with, or on the Sweeper.
14.Keep the Sweeper clean. Prior to each use, clean nails, staples or any debris off the Sweeper.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking your Magnetic Sweeper, make certain that all parts on page 5 of this manual are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at
1-800-444-3353.
Assembly
Your 30” Magnetic Sweeper with Wheels will require simple assembly. It is important that you read the entire manual to become familiar with the product BEFORE you assemble and use the Magnetic Sweeper.
1.As necessary, attach the Connecting Plate (10) to the Aluminum Body (9) using two Bolts
2.Slide the Thin Tube (3) down into the slot in the Connecting Plate (10). Secure the Thin Tube
(3)to the Connecting Plate with Pan Head Bolt (16) and Nut (23).
3.Slide the Thin Tube (3) into the Thick Tube (2) and secure in place with Plastic Knob (12). If not already attached, slide on Plastic Handle (1).
Operation
To release the material that has been picked up by the Magnetic Sweeper, place the Aluminum Body (9) over a trash can or desired debris destination. Pull up on the Adjustable Handle (11) as in Figure 1. Move the Sweeper away from the debris before releasing the Handle (11) or it
will pick up the debris again. Adjust the handle to the desired height, the handle telescopes from 30” L to
REV 08e
SKU 93245 | For technical questions please call | Page 3 |
