Harbor Freight Tools 93271 Unpacking, Operating Instructions, To Check The Oil Level

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts Lists on pages 10, and 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed below, refer to the Assembly

Diagrams on pages 10, and 11.

To Check The Oil Level:

1.The Oil Window (20B) is used to determine if oil is needed. The oil level should always be at the maximum level (red line on the Oil Window). (See Figure A, and

Assy. Diagram B.)

2.WHEN OPENING THE DIP STICK: Make sure to unscrew (do not pull) the Dip Stick (14B) out. (See Figure A.)

3.If necessary, add a premium quality, 30-weight,non-detergent oil into the Oil Fill Hole until the level of oil reaches the maximum level as indicated on the Oil Window (20B). The optimal capacity of the oil reservoir is 30 ounces. Do not overfill. Then thread the Dip Stick back into the Oil Fill Hole, being careful not to strip the plastic threads.

Dip Stick (14B)

Front Cover (18B)

Oil Window (20B) FIGURE A

To Turn The Air Compressor On:

1.Check to make sure the Water Drain Valve (10A) is fully closed.

(See Assy. Diagram A.)

SKU 93271 For technical questions, please call 1-800-444-3353. PAGE 5