3.Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.)

DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS

4.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B.)

5.Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.)

Note:

This tool has a

2 Prong Plug.

FIGURE B

SKU 93431

For technical questions, please call 1-800-444-3353.

Page 8

Page 8
Image 8
Harbor Freight Tools 93431 operating instructions Double Insulated Tools Tools with TWO Prong Plugs, Figure B