UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SETUP INSTRUCTIONS
1.
CAUTION! Always make sure the Power Switch (34) of the Air Compressor is in its “OFF” position and the unit is unplugged from its electrical outlet prior to per- forming any service, maintenance, or cleaning of the Compressor.
2.Before operating, make sure the Air Compressor is set up in a
OPERATING INSTRUCTIONS
To Start The Compressor:
1.Insert the Power Cord Plug (35) into the nearest 120 volt, grounded, electrical out- let. (See Figure A.)
2.Connect an Air Brush (not included) to the Air Hose (42) of the Compressor. Use Hose Adapter (44) if needed.
3.Turn the Power Switch (34) to its “ON” position. (See Figure A.)
FIGURE A
Note: This Compressor is designed for use with air brushes; never attempt to operate this compressor with any other type of painting equipment.
PRESSURE |
| HANDLE |
GAUGE (11) |
| (30) |
| REGULATOR |
|
| KNOB (40) | POWER |
|
| |
|
| SWITCH |
|
| (34) |
WATER
POWER
DRAIN
CORD
VALVE (40)PLUG 
(35)
SKU 93657 | For technical questions, please call | Page 8 |
