Harbor Freight Tools 93981 OPERATING INSTRUCTIONS

Page 10SKU 93981 For technical questions, please call 1-800-444-3353

OPERATING INSTRUCTIONS

Horizontal to Vertical

Pivot Hex Nuts (13)

Belt Tracking Ad-

justing Knob (35)

Belt Tension

Lever (34)

Switch (16)

Switch Key

Table Angle

Adjusting Knob (55)

Table Angle Scale

Table (59)

Angle Pointer (58)

Mount the Table Tilt Trunion (56) to the Table (59) using Hex Bolt (51), Flat Washer (53),

and Lock Washer (52). Securely tighten. See photos at the bottom of page 9.

Mount the other end of the Table Tilt Trunion (56) to the Pivot Bracket (48) using Flat

Washer (54) and Adjusting Knob (55). Securely tighten.

Slide the Pivot Bracket (48) all the way onto the Rod (47) and tighten Set Screw (50).

Remove Disc (22) by loosing Set Screw (17) and pulling the Disc off.

Block Stop (7)

Hex Bolt (20)

Flat Washer (21)

Platen (8)

For sanding using the Belt (4), mount the Block Stop (7) to the Platen (8) using Hex

Bolt (20) with Flat Washer (21). Securely tighten.