ASSEMBLY INSTRUCTIONS
1.When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
2.This product comes preassembled. No additional assembly is necessary.
OPERATING INSTRUCTIONS
Warning: Do not overcharge maintenance- free batteries. Do not try to start the engine with the Battery Charger connected to the battery.
1. FOLLOW ALL CONNECTION
PRECAUTIONS AS OUTLINED ON PAGES 4 & 5 OF THIS MANUAL. Place the Battery Charger and battery in a well- ventilated area.
2.Determine the voltage of the battery from the battery labels.This device is intended for use on 12 Volt batteries only
3.Push the Charge Rate Switch to the desired amperage.
4.If charging a battery while in a vehicle, leave the hood open and do not leave the charger unattended. Separate the charger and battery as much as possible.
5.If the battery is not a
6.With the Battery Charger unplugged, connect the positive (red) Cable Clamp to the positive terminal of the battery.
If charging a battery mounted in a vehicle, first remove the vehicle’s red cable from the battery; otherwise damage may occur to the vehicle’s electrical system. If in doubt, refer to the vehicle’s service manual.
Front Panel
Cable Connections
(Red) | (Black) | Note: Attach cables to | |
battery before plug- | |||
Positive | Negative | ||
ging charger in. | |||
Connection | Connection | ||
| |||
|
|
|
SKU 94088 For technical questions, please call | Page 7 |
