Operation

Preparing to Take Measurements

Warning! Laser radiation is dangerous and can cause permanent eye damage. Do not stare into the beam or point it at others.

Note: You will need to set the “C” or “F” key (5) to establish an LCD readout in either Fahrenheit or Celsius. Refer to the Assembly Drawing on page 8.

1.The Thermometer automatically powers ON when the Measuring Key (7) is selected. The Thermometer will power OFF automatically approximately 7 seconds after the Measuring Key (7) is released. See Figure 2.

2.Make sure the target is larger than the units’s spot size. The target should be at least twice as large. Being closer to the spot will assure accuracy.

3.Select the temperature units you wish by first pressing the Measuring Key (7) and then the “C” or F” Key (5). Toggle back and forth to choose the correct reading.

Distance (D) to Spot Size (S)

Flexible Thermometer

Inches

8@1

16@2

32@4

64@8

D:S = 8:1

Millimeters

200@25

400@50

800@100

1600@200

 

 

 

Figure 1

Special Considerations: Make sure the surface of the object is not covered with frost, dust or other materials. For accurate results, clean all surfaces before measuring. If the surface you are measuring is highly reflective, (while it is cool) either paint it with a heat-resistant flat black paint or put a non-reflective tape on the spot you are measuring.

Laser Key

(4)

LCD Display

(3)

SKU 94233

Backlight

Key (6)

Measure

Key (7)

Celsius or

Fahrenheit

Key (5)

 

 

Infrared Sensor (1)

 

 

and Laser Point

 

 

Beam (2)

Figure 2

 

For technical questions, please call 1-800-444-3353

Page 4

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 94233 operating instructions Operation, Preparing to Take Measurements, Distance D to Spot Size S
Page 3 Page 5

94233 specifications

Harbor Freight Tools has long been a go-to destination for DIY enthusiasts and professional craftsmen alike, offering a wide array of affordable and reliable tools. Among their diverse lineup, the Harbor Freight Tools 94233 stands out as a noteworthy product due to its impressive features and innovative design.

The Harbor Freight Tools 94233, commonly known as the 12-inch Sliding Compound Miter Saw, combines versatility and precision for both home improvement projects and professional tasks. One of its main features is the powerful 15-amp motor, which delivers high performance and can handle tough cutting applications with ease. This motor allows users to achieve smooth, accurate cuts in both wood and other materials commonly found in workshops.

A key element of the 94233 is its sliding feature, which expands the cut capacity. This sliding mechanism enables users to cut wider boards and is advantageous when tackling larger projects where traditional miter saws would fall short. The saw boasts a 12-inch blade, allowing for precise crosscuts and bevel cuts clear of any obstructions.

Additionally, the Harbor Freight 94233 comes equipped with dual bevel capability. This feature allows users to tilt the blade in both directions, making it significantly easier to perform compound cuts without having to reposition the workpiece. This is particularly beneficial for crown molding and intricate trim work, where accuracy is paramount.

The laser guide system is another prominent characteristic of this model. The built-in laser ensures precise alignment, helping users achieve clean, accurate cuts every time. This technology is essential for reducing errors and enhancing overall efficiency, ultimately saving users time and material costs.

The user-friendly design of the Harbor Freight 94233 also includes an adjustable fence that provides optimal support for larger pieces of material. The integrated dust bag helps maintain a clean work area by effectively capturing sawdust, which is crucial for visibility and safety during operation.

In conclusion, the Harbor Freight Tools 94233 Sliding Compound Miter Saw offers a combination of power, versatility, and innovative technology that caters to both hobbyists and professionals. With features like a robust motor, sliding capabilities, dual bevel functionality, and a laser guide system, users can expect accuracy and ease of use on a variety of cutting tasks, making it a valuable addition to any tool collection.
Top Page Image Contents