![](/images/new-backgrounds/1302065/3020657x1.webp)
Service
24.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
25.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspec- tion, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
Specific Safety Rules
1.Ensure that the directional arrow on the blade is mounted the same direction as the rotational direction of the motor.
2.Always wear
3.Periodically check to be sure the Locking Arbor Nut (38) is tight, and the Blade is securely fastened to the Arbor Shaft.
4.Never try to cut freehand. Only cut tile that is securely held against the fence of the Sliding Table or the Miter Gauge. Never try to cut pieces that are too small to be held securely or that do not allow you to keep your hands safely away from the blade.
5.When starting this power tool, always ensure that it remains in place on a stable work platform.
6.Only use a
7.Never cut more than one tile at a time.
8.Allow the motor to come to full speed before cutting. If the blade vibrates or makes an unusual sound, turn off the tool, unplug it, and investigate to find the source of the problem.
9.Let the blade come to a full stop before attempting to remove any jammed material.
10.Never walk away from the tool until the motor has come to a complete stop. The tool may create unforeseen risk while the motor cycles down. Never leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
11.Never allow the blade to run dry. Cutting with a dry blade will cause excessive wear and possible damage to the blade and motor.
12.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from
scopic particles. (California Health & Safety Code § 25249.5, et seq.)
13.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
14.Use only 8” wet type blades specifically designed for tile cutting. Do not use any blade rated for less than 4500 RPM.
SKU 94443 | For technical questions, please call | Page 4 |