INSPECTION, MAINTENANCE,
AND CLEANING
CAUTION! Make sure the Power Switch
(58) is in its “OFF” position and unplugged from its Charger (63). Then,
1.Before each use, inspect the general condition of the Sprayer. Check for misalignment or binding of moving parts, damaged or loose parts, dirt or debris in the Filter and Nozzle, damaged electrical wiring, and any other condition that may affect the tool’s safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
2.To clean: If using liquid chemicals, flush the interior and clean the exterior of the Sprayer and its Spray Gun Assembly thoroughly with cleaning agents recommended by the chemical manufacturer. Then, allow to
3.When storing: Always completely empty the Sprayer of liquid. Frost will damage the Sprayer if the unit contains liquid. Store the Sprayer in an indoor area such as a garage or shed. Make sure to store the Sprayer and any chemicals in a safe, dry, clean location out of reach of children and other unauthorized people.
4.CAUTION! All maintenance, service, and repairs not discussed in this manual should only be performed by a qualified service technician.
|
|
|
|
|
|
|
| TROUBLESHOOTING | |
|
|
|
| |
Problem |
|
| Possible Solution | |
Unit does not spray. | 1. | Fully charge the battery. | ||
| 2. | Fill the tank. | ||
| 3. | Firmly tighten the Tank Cap and secure all connections on the tank and | ||
|
| the spray gun assembly. | ||
| 4. | Clear the Nozzle on the Spray Gun assembly of dirt and debris. | ||
The spray pattern is | 1. Use the proper Nozzle for the job at hand. | |||
undesirable. | 2. Clear the Nozzle on the Spray Gun assembly of dirt and debris. | |||
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94573 | For technical questions, please call | Page 9 |
