12.Do not operate the Worklight in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Electrical products create sparks which may ignite the dust or fumes.
13.Do not submerge in water or any other liquid.
14.WARNING: The cord of this product contains lead and/or di
Assembly
15.Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
1.Charge the Worklight before using it for the first time.
2.Plug the AC/DC Adapter into the Worklight at its base. Plug the AC/DC Adapter to a 120V electrical outlet.
5.To turn the Worklight on, press down on the On/Off Switch. To turn the Flashlight “OFF”, press down on the opposite end of the On/Off Switch.
Adapter
Connection
3.Allow the Worklight to charge. Charging Indicator Light is the bottom LED bulb in center row. When Unit is charging, Charging Indicator Light will glow
red. When Charging Indicator Light glows green, unit is fully charged. Disconnect the AC/DC Adapter.
4.The Worklight also has a cigarette lighter adapter which can be plugged into a vehicle’s cigarette lighter. Allow Batteries to charge. Disconnect the Adapter.
On/Off
Switch
6.The Cigarette Adapter contains one 250V, fast acting 3 Amp Fuse. To replace the Fuse, make certain the Adapter
is unplugged. Open up the Cigarette Adapter, remove Fuse and insert new one. Close Cigarette Adapter.
7.The Worklight can be attached to metal work surfaces by placing its magnetic base against the metal portion of the work surface. The Worklight can also be hung by the Hanging Hook at its top. The Hanging Hook swivels 360 degrees.
Item 94668 | For technical questions, please call | Page 3 |
