Harbor Freight Tools 94837 Specifications, Save This Manual, Safety Warnings and Precautions

	Specifications
Item	Description
Pump Output	4.3 GPM (16.56 liter per min.) @ 3,60 RPM
Pump Type	Two Stage
Hydraulic Capacity	8 Tons, single stage pump
Ram Travel	19-7/8 inches
Ram Diameter	1.78 inches
Cutting Wedge	Thickness: 13/16 incl; Thick cabon steel
Log Capacity	20” (long) x 8” (dia.)
Towing	For off-road use only (not DOT approved); Hitch size: 1-7/8 inches
Hydraulic Fluid Reservoir	1.5 gallons
Type of Hydraulic Fluid	10W AW Hydraulic Fluid or Dexron III automatic transmission fluid.
	Change every 100 hours of use.
Wheel Size	Wheel: 15 inch diameter; Hub: 8-1/2 inches; Wheel base: 20 inches
Tire Pressure	60 PSI Maximum
Engine	Briggs & Stratton Model 9J902 gasoline engine
	Oil: 18 oz. of SAE 30 detergent oil rated SF,
	SG, SH or higher; Spark Plug gap: 0.030”
	(0.76mm), Part #802592; Gas type: unleaded,
	85 octane or higher
Overall Dimensions	68”(L) x 27-3/4”(W) x 31-3/4”(H)
Weight	250 lbs.
	Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

		REV 07a; 09h
SKU 94837	For technical questions, please call 1-800-444-3353	Page 2