THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below:

Model______________

Serial No._____________

Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

Overall Deck Dimensions:

50” L X 15-1/2” Deep

Flat Area:

50” L X 8-1/4” Deep

Front Angle Area:

50” L X 8”, 30° Angle

Deck Steel Gauge:

12 Gauge

Ground Clearance:

9-1/4” High

Maximum Weight Capacity:

900 Lbs.

Wheels:

8” diameter X 1.75” W, solid black rubber

Weight:

68.7 Lbs.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Keep work area well lighted.

3.Store idle equipment. When not in use, the Drywall Dolly must be stored in a safe and clean location. Always lock up products and keep out of reach of children.

4 . Use the right product for the job. There are certain applications for which the Drywall Dolly was designed. Do not modify the Dolly and do not use the Dolly for a purpose for which it was not intended.

5.Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately.

6.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty.

7.Do not operate product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product.

8.Use eye protection. Always wear ANSI-approved impact safety goggles when assembling and using this product.

SKU 94883

For technical questions please call 1-800-444-3353.

Page 2

Page 2
Image 2
Harbor Freight Tools 94883 operating instructions Technical Specifications