6.Do not force the Cordless Screwdriver. This tool will do the work better and safer at the capacity for which it was designed.
7.Unplug the Charger Adapter from the Cordless Screwdriver and the electrical outlet before use or before performing any inspection, maintenance, or cleaning procedures.
8.Never leave the Cordless Screwdriver unattended while running. Turn power off if you have to leave the Cordless Screwdriver.
9.People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
10.Connect the Charger Adapter to a Ground Fault Circuit Interrupter (GFCI) protected electrical outlet.
Grounded Tools:
Tools with Three Prong Plugs
1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock.
2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal.
Grounding
WARNING Improperlyconnecting the grounding wire can result in electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
3.The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the preceding illustration. (See
Plug and Outlet.)
Double Insulated Tools:
Tools with Two Prong Plugs
1.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code.
SKU 95065 | For technical questions, please call | Page 5 |
