6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
7.Use eye and ear protection. Always wear
8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
9.Maintain pump with care. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. Disconnect electrical source before performing any maintenance or troubleshooting.
10.Avoid unintentional starting. Dry running of the pump causes excess wear.
11.Stay alert. Watch what you are doing, use common sense. Do not operate any pump when you are tired.
12.Check for damaged parts. Before using any pump, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function.
13.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. It is strongly recommended that this pump be plugged into a Ground Fault Circuit Interrupter (GFCI). Ask a local electrician for easy installation instructions. To avoid electrical shock, no person or animal should be in contact with the water being pumped. Never walk on wet or damp area when pump is running in the same room.
14.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty.
15.Do not operate pump if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the pump.
16.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket). Note: Do not make the extension cord connection underwater.
17.Do not pump hazardous materials. Do not pump explosive or flammable materials such as Fuel Oil, Kerosene, Gasoline etc. Do not pump in close proximity to flammable or explosive materials. Do not pump fats, oils, salt or waste water. This Pump is designed to move clean or dirty water. Do not pump hot liquid.
SKU 95267 | Page 3 |
