hook by a Small Loop (1) at the top of the light. See Figure 3 and Assembly Drawing on page 7.
6.Choose the location for the Solar Candle Garden Lantern and stick the Shepherd’s Hook and Ground Stake (16) into the ground, avoiding any underground wiring or plumbing. Be sure to choose a location that gets plenty of sunshine during the day and is not near a porch or street light at night. See Figure 3.
7.If the Solar Candle Garden Lantern stops working or is not holding a charge for a long enough period, replace the batteries with identical rechargeable NiCd “AA” batteries. See directions below for battery replacement.
Small Loop (1)
FIGURE 4
Note: The Solar Candle Garden Lantern can be removed from the Shepherd’s Hook and Stake and used as a table Lantern. See Figure 4.
BATTERY REPLACEMENT
1.Turn the Top Assembly of the Solar Candle Garden Lantern slightly counterclockwise. Remove the assembly from the top of the Solar Candle Garden
Lantern.See Figure 1 on page 3.
2.Take assembly off the Lantern, being careful not to disturb the wires and the internal components. See Figure 2 on page 4.
3.Remove the used Batteries (8) and dispose of them properly according to the Solid Waste Disposal regulations in your community. Replace with new Rechargeable
SKU 95797 | For technical questions, please call | Page |
