Harbor Freight Tools 95845 manual Screw Backrest Armrest

FIGURE 3

Screw (6)

Backrest (2)

Armrest (1)

3.Attach the Back Assembly with LED Lights (2) to the Armrest (1), right and left. Use the four Screws (6) through the brackets on both Armrests (1) and through the Back Assembly (2). Tighten Screws. See Figure 3.

4.To secure the Bench to the ground, hammer the Ground Nails (9) through the pre-drilled holes at the base of each leg. Make sure that when hammering nails into ground that the area is clear of any underground wires or cables.

SKU 95845 For technical questions, please call 1-800-444-3353 Page