Harbor Freight Tools 96526 Specifications, Unpacking, Set-Up Instructions, To Charge The Battery

	Specifications
	Charger Input: 120 V~ / 60 Hz
	Charger Output: 24 VDC / 400mA
Electrical Requirements	Battery Type: 1300 mAh Ni-Cd Rechargeable
	Charge Time: 3 to 5 Hours
	Power Cord Type: 22 AWG x 2C
Drill Speed	Dual Speed
	Drill RPM: 0~400 RPM (#1 Setting) / 0~1050 RPM (#2 Setting)
Chuck Type	1/2” Keyless
Settings	20 Clutch Settings / 1 Drill Setting
Additional Features	Reversible Rotation
Accessories	Battery (Qty. 1) / Charger (Qty. 1)
	Double Ended Screwdriver Bits (Qty. 2)
Drill Dimensions	9-1/2” L x 3-1/8” W x 8-1/8” H (Without Battery)
Net Weight	4.2 Pounds

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Set-Up Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

	Risk of accidental starting; resulting in serious personal
WARNING
	injury. Turn the Power Switch of the tool to its “OFF”
	position and unplug the tool from its electrical outlet before
	assembling or making any adjustments to the tool.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

To Charge The Battery

1.The Battery (29) does not come charged from the manufacturer. Before use, you must charge the Battery. (See Figure A, next page.)

2.Plug the AC/DC Adapter’s (24) 2-prong plug into the nearest 120 volt, grounded, electrical outlet. (See Figure A.)

3.Insert the AC/DC Adapter’s (24) charge cord into the Charger Stand (23).

(See Figure A.)

SKU 96526 For technical questions, please call 1-800-444-3353. Page