Harbor Freight Tools 96823 manual Specifications, Unpacking, Assembling, Cleaning

	Specifications
Electrical Requirements		120 V~ / 60 Hz
Working Temperature		14°~104° F (-10°~+40° C)
		< 90% Relative Humidity
Power Cord		18 AWG X3C SVT X 6FT
Battery		6 Volt lead-acid Battery (included)
Capacity/Accuracy		0.88 to 130 Pounds ± 0.001 Pound
		(400g to 60 Kg ± 0.5g)

HOUSEHOLD USE ONLY

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Assembling

1.Plug the wires threaded through the Support Tube (4) into the Base (6).

2.Secure the Support Tube to the Base using Hex Bolts (5).

3.Plug the wires at the top of the Support Tube into the Display (1), slide the Display onto the top of the Support Tube, and secure with the Hex Nut (2) and Hex Bolt (3).

Cleaning

Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

WARNING Risk of Shock!

Before cleaning appliance, make sure the appliance’s switch is turned off and the cord is unplugged.

Do not immerse motor/heating element, cord, or plug in water or any other liquid.

1.Wipe down the non-electrical parts of the unit before use with a mild detergent and dry with a soft cloth.

2.Allow unit to dry completely before assembly or use.

SKU 96823 For technical questions, please call 1-800-444-3353. Page 4