UNPACKING AND SET UP
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
NOTE: READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 9 of this manual.
WARNING! Make sure the tool is unplugged from its air supply before making any adjustments to the tool. Also make sure the Magazines (47 and 51) are empty before set up or maintenance.
Coupler | Coupler |
Plug | Plug |
Tool
Quick
CouplerAir Hose
on Reel
Valve | Oiler | Filter |
Air
Compressor
Regulator with
Pressure Gauge
Recommended Air Line Components
If you are not using an automatic oiler system, before operation add a few drops of Pneumatic Tool Oil (not included) to the airline connection. Add a few drops after each hour of continual use.
Set the air pressure range on the regulator so that it is between 60 and 100 PSI. Do not exceed 100 PSI.
LOADING THE NAILER
1.Depress upper tip of the Click Lever
(59).The Side Cover (34) will pop
open.
2.Insert a row of fasteners (not included) into the Upper Right Magazine (47/51). Make sure the pointed ends of the fasteners are loaded with the points downward. Also make sure fasteners are not dirty or damaged.
3.Slide the Side Cover (34) back over the Upper Magazine (47/51) and press the upper tip of the Click Lever
(59)in ward to lock Side Cover (34) in place.
NOTE: For best service, you should incorporate an oiler, regulator, and
SKU 97526 | For technical questions, please call | Page 5 |
