Table Saw Safety Warnings

the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.)

For Your Own Safety Read Instruction

Manual Before Operating Saw

1.Wear eye protection.

2.Use saw-blade guard and spreader for every operation for which it can be used, including all through sawing.

3.Keep hands out of the line of saw blade.

4.Use an appropriate push-stick when required.

5.Know how to reduce risk of kickback.

6.Do not perform any operation freehand.

7.Never reach around or over saw blade.

8.Make sure the workpiece is supported at all times while sawing. Use a roller stand (not provided) with larger workpieces if necessary.

9.To properly understand all safety warnings, be familiar with the following safety terms and equipment:

a.Featherboard – A block with “fingers“ that hold the workpiece against the fence while sawing.

b.Through-sawing – A cut made from one side of a board to the opposite side, without stopping.

c.Ripcut or Ripping - A cut made parallel to (along with) the grain of the wood.

d.Crosscut or Crosscutting - A cut made perpendicular (at a 90° angle) to the grain of the wood.

e.Push-stick – A narrow strip of wood or other soft material with a notch cut into one end and which is used to push short pieces of material through saws. It provides a safe distance between the hands and the cutting tool. Must be narrower than the cut width to prevent contact with the blade.

f.Freehand – Feeding a workpiece through the saw without using a fence or guided support to guide it. Not a safe method.

g.Kerf – The gap made by the saw in the workpiece.

h.Kickback – A sudden reaction to a pinched, bound, or misaligned blade, causing an uncontrolled workpiece to lift up and out of the saw toward the operator.

i.Spreader – A metal plate that follows the saw blade to keep the kerf (gap) from closing on the saw blade. Spreaders, except riving knives, must be aligned to the blade after blade adjustment to prevent binding.

j.Riving Knife – A spreader mounted on the same mechanism as the blade. Generally more effective than simple spreaders.

10.As noted previously, Kickback is a sudden reaction to a pinched, bound, or misaligned blade, causing an uncontrolled workpiece to lift up and out of the saw toward the operator. Kickback is usually a result of tool misuse and can be limited or avoided by following the precautions below:

SKU 97896

For technical questions, please call 1-800-444-3353.

Page 5

97896 specifications

The Harbor Freight Tools 97896 is a versatile and compact tool that has garnered attention for its practicality and robust features. Designed for both DIY enthusiasts and professionals, this tool offers a range of functionalities that make it an indispensable addition to any workshop or garage.

One of the standout features of the 97896 is its powerful motor, which provides reliable performance for various cutting tasks. This tool is designed to deliver consistent power, ensuring that users can tackle a wide range of materials, including wood, plastic, and even metal with ease. The motor’s efficiency not only enhances the overall cutting capability but also contributes to a longer tool lifespan, making it a cost-effective choice for users.

The 97896 incorporates advanced safety features that prioritize user protection during operation. These include a safety switch that helps prevent accidental activation and a durable housing designed to withstand the rigors of heavy use. Additionally, the tool is equipped with a comfortable grip that reduces hand fatigue, allowing for extended use without discomfort, making it ideal for prolonged projects.

Portability is another key characteristic of the Harbor Freight Tools 97896. Its lightweight design, coupled with its compact size, allows for easy transportation and storage. Users can conveniently move it from one job site to another or stow it away when not in use. This makes it an excellent option for contractors and mobile workers who need a dependable tool on the go.

Another notable technology integrated into the 97896 is its user-friendly interface. With straightforward controls, users can easily adjust settings to suit their specific tasks. Whether making fine cuts or quick modifications, the tool supports a seamless transition between functions, enhancing overall efficiency.

In summary, the Harbor Freight Tools 97896 stands out for its powerful performance, safety features, portability, and user-friendly design. It effectively combines practicality with advanced technology, making it well-suited for both professional contractors and do-it-yourselfers. Whether you are tackling home repairs or large construction projects, the 97896 promises to deliver reliable results, making it a worthwhile investment for anyone in need of a dependable cutting tool.

Harbor Freight Tools 97896 operating instructions Table Saw Safety Warnings

Models: 97896