Specifications | Tool Set Up |
Electrical Requirements | 230 V~ / 60 Hz | |
19.8 Amp | ||
| ||
Welding Current Range | 10 to 165 A | |
| 60% @ 165 Amps | |
Duty Cycle | 80% @ 126 Amps | |
| 100% @ 98 Amps | |
Gas Fittings | Intake: 9/16” 18 TPI | |
Outlet: 3/8” 24 TPI | ||
| ||
Gas Input | 10 PSI | |
Tungsten Electrode Size | 5/32” | |
Capacity | up to 1/4” Steel Plate |
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
List of contents
Description | Qty |
Electrode Holder | 1 |
TIG Torch | 1 |
Ceramic Gas Nozzle | 4 |
1/8" Copper Collet Body | 1 |
Copper Collet | 4 |
Black Cap | 1 |
Ground Clamp | 1 |
Set up Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Connection of a 230V UL listed plug rated to at least 20 Amps to this unit must only be performed by a certified electrician. The plug installed for the Welder must match the receptacle.
Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to al- low free movement while working.
3.Secure loose work pieces using a vise or clamps (not included) to pre- vent movement while working. For greater safety; ground the workpiece.
4.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.
SKU 98233 | For technical questions, please call | Page 11 |
