Harbor Freight Tools 98399 Important Safety Information, Operation, Assembly Precautions

Models: 98399

1 3
Download 3 pages 11.98 Kb
Page 2
Image 2

Important SAFETY

Information

Assembly Precautions

1.Assemble only according to these instruc- tions. Improper assembly can create haz- ards.

2.Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3.Keep assembly area clean and well lit.

4.Keep bystanders out of the area during as- sembly.

5.Do not assemble when tired or when under the influence of drugs or medication.

Use Precautions

1.This product is not a toy. Do not allow chil- dren to play with or near this item.

2.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

3.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pace- maker failure.

4.The Sweeper contains a 9 Lb. magnetic pull capacity and should not be used around ma- terials and components that can be damaged when exposed to a magnet.

5.Use for intended purpose only.

6.Dress properly. Do not wear loose cloth- ing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

7.Inspect before use; do not use if parts loose or damaged.

8.Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Read the entire Important Safety Information section at the beginning of this document including all text under subheadings therein before set up or use of this product.

Assembly

Figure 1

Sweeper

Handle (3)

Pan Head

Bolt (7)

Magnet

 

 

 

 

 

 

 

 

Handle

Housing

Housing (1)

Base (5)

Handle (6)

1.Insert Sweeper Handle (3) into Handle Base

(5) and secure with Pan Head Bolt (7). See Figure 1, above.

operation

Figure 2

Wing Nut

Sweeper

Handle (1)

1.Adjust the Sweeper Handle (3) to the desired height by unscrewing Wing Nut and sliding handle tube up or down-see Figure 2, above. The Handle telescopes from 37” to 51” when extended.

2.When the desired height is reached, tighten the Wing Nut into place.

3.While holding the handle, roll the Magnetic

Sweeper across the desired floor area such as a workshop, garage, warehouse, etc. The Magnetic Sweeper will pick up metal objects such as nails, pins, bolts, screws and metal shavings.

SKU 98399

For technical questions, please call 1-800-444-3353.

Page 2

Page 2
Image 2
Harbor Freight Tools 98399 specifications Important Safety Information, Operation, Assembly Precautions, Use Precautions