Specifications
Electrical Requirements | 120 V~ / 60 Hz / 15 A | |
|
| |
Air Outlet Size | Two 1/4” 18 NPT | |
|
| |
| Auto | |
Air Pressure | PSI | |
| Restart at 90 PSI | |
Air Tank Capacity | 25 Gallons | |
Air Flow Capacity | 5.3 CFM @ 40 PSI | |
4.0 CFM @ 90 PSI | ||
| ||
Oil Tank Capacity | 1 Quart | |
Oil Type | 30W | |
Compressor Oil | ||
| ||
Sound Level | 98 dB @ 3’ | |
Motor | 3.5 HP |
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly
1.Thread the Intake Filter (16) onto the side of the motor, as shown below.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Instructions for putting into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Intake Filter (16)
2.Connect one or two 1/4” NPT air hoses (rated 165 PSI or higher) to the Quick Couplers (25). See photo next page. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working.
3.Incorporate an
REV 08j
SKU 99925 | For technical questions, please call | Page 7 |
