3.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
4.Avoid unintentional starting. Make sure you are prepared to begin work before turn- ing on the Belt Sander.
5.Do not force the Belt Sander. This tool will do the work better and safer at the speed and capacity for which it was designed.
6.Always unplug the Belt Sander from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
7.Never leave the Belt Sander unattended while running. Turn power off if you have to leave the Belt Sander.
8.Before each use, check all nuts, bolts, and screws for tightness. Vibration during mixing may cause these to loosen.
9.Keep extension cord off the ground and away from water.
10.Always connect the Line Cord to a Ground Fault Circuit Interrupter (GFCI) pro- tected electrical outlet.
11.Install this product on a proper surface. Locate on a flat, level, and solid surface that is capable of supporting the weight of the Belt Sander.
12.Always maintain a maximum of 1/16 inch clearance between the table and the sanding Disc.
13.Do not use the right side of the disc for sanding. The material could kick back.
14.Hold material securely while sanding to avoid kickback.
15.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from
16.
WARNING! People with pacemakers should consult their physician(s) before us- ing this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
SKU 93981 | For technical questions, please call | Page |
