Specifications
On - Off | Tap on - Auto Off after 5 | |
seconds of non use. | ||
| ||
LCD Size | ||
|
| |
Power Supply | 2 - 3V | |
(Included) (2 x | ||
| ||
Capacity | 5~330 lb. in .2 lb. increments | |
2.5~150 kg in .1 kg increments | ||
|
Important Safety Information
WARNING! To prevent serious injury:
1.Do not use if wet.
2.Do not exceed 330 lb. maximum weight.
3.This product is not a toy. Do not drop, or allow children to play with, or use this Scale unattended.
4.Use only on level, hard, flat surface. Using on cushioned surface (such as rug or carpet) may cause uneven load, causing inaccurate readings and increasing the risk of damage.
5.Do not jump on this Scale.
6.Maintain product labels
and nameplates. These carry important safety information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
7.Use as intended only;
not for trade or postal use.
Operation Instructions
1.Place the Bathroom Scale on a hard, flat, smooth surface.
2.Tap the Scale with your foot to turn it on. It will flash “18888” and then “0.0” to signify it is ready. Step evenly onto the Scale and stand motionless to see your weight appear in Display.
3.The scale will return to “0.0” once you step off and then automatically turn off.
NOTE: When the Batteries are low, the Display will read “LO”. Follow the battery replacement procedures in the “MAINTENANCE” section of this manual.
NOTE: Press the Mode Switch to the left of the battery housing (see photo) to toggle between “kg” (kilogram), “lb” (pound) and “st” (stone) weight measurements.
REV 08g, 09c, 11a, 11b, 12h
Page 2 | For technical questions, please call | Item 99917 |
