
User Manual
2-Series
Insert the graphic equalizer between the signal source (usually a mixer) and the power amplifiers (or the crossover if there is one). Adjust the level and equalization as required to yield the desired system response.
For optimum
SPECIFICATIONS
Inputs |
|
|
Connectors: | 1/4" TRS, female XLR (pin 2 hot) | |
Type: | Electronically balanced/unbalanced, RF filtered | |
Impedance: | Balanced 40kΩ, unbalanced 20kΩ | |
Max Input Level: | >+21dBu balanced or unbalanced | |
CMRR: | >40dB, typically >55dB at 1kHz | |
Outputs |
|
|
Connectors: | 1/4" TRS, male XLR (pin 2 hot) | |
Type: | ||
Impedance: | Balanced 100Ω, unbalanced 50Ω | |
Max Output Level: | >+21dBu balanced/unbalanced into 2kΩ or greater | |
System Performance | >+18dBm balanced/unbalanced (into 600Ω) | |
|
| |
Bandwidth: | 20Hz to 20kHz, | |
Frequency Response: | <10Hz to >50kHz, | |
Dynamic Range: | 108db |
|
90db |
| |
THD+Noise: | <0.004% |
|
Interchannel Crosstalk: |
| |
Function Switches |
|
|
EQ Bypass: | Bypasses the graphic equalizer section in the sig- | |
| nal path |
|
Low Cut: | Activates the 50Hz 12dB/octave | |
Range: | Selects either +/- 6dB or +/- 12dB slider boost/cut | |
Power Supply | range |
|
|
| |
Operating Voltage: | 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz | |
Power Consumption: | 12W (231=15W) |
|
Mains Connection: | IEC receptacle |
|
Physical Dimensions |
|
|
231: | Size: 3.5"Hx19"Wx6"D | Weight: 6 lbs |
215: | Size: 1.75"Hx19"Wx6"D | Weight: 4.7 lbs |
131: | Size: 1.75"Hx19"Wx6"D | Weight: 4.7 lbs |
Note: Specifications subject to change.
10