Harman-Kardon HD710 RearPanelConnections, Connection Cords, Optional Digital Connection, English

	RearPanelConnections
	TO INPUT JACKS OF AMP/RECEIVER
ENGLISH		INPUT
	1
			3
	DIGITAL		AC
	OUTPUT
		REMOTE	INPUT
			MODEL NO.: HD710
	LEFT		HARMAN/KARDON
			NORTHRIDGE
	IN	OUT
			CALIFORNIA U.S.A.
	RIGHT
	2

TO REMOTE OUT OF HARMAN/KARDON

REMOTE CONTROL AMPLIFIER,

RECEIVER OR TAPE DECK

•Before you begin to connect this unit to your system, be sure that all components are turned off and unplugged from the electrical outlet.

•See the connection diagram in the operating instruction manual of a Harman/Kardon compatible amplifier or receiver.

1. CONNECTION CORDS

On the back of your HD710 are output jacks that connect your CD player to your receiver, integrated amplifier, or preampli- fier. Using the supplied shielded cords, connect the left and right output jacks on the back of the CD player to the left and right input jacks marked CD or AUX on the back of your receiver/preamplifier/ integrated amplifier. Alternatively, you can also use the TAPE INPUT or TAPE PLAY jacks on your receiver/preamplifier/ integrated amplifier.

Note: NEVER connect your CD player to the PHONO inputs.

2.OPTIONAL DIGITAL CONNECTION

The HD710 also has a digital output jack

—a single electrical RCA-type connector. If your preamplifier has a digital-to-analog decoder and can accept a digital signal from a compact disc player, you can connect your CD player to your preampli- fier using this digital jack.

Please note that using the digital output will bypass the internal D/A conversion circuitry and therefore miss one of the major benefits of this machine. The best use of this output is for direct connection to a digital recorder, a very high perfor- mance external D/A Converter, or a true Digital Signal Processing (DSP) Preampli- fier.

3. AC INPUT CORD

Plug this cord into the AC outlet of amplifier or receiver or a household AC outlet.

5