Installation and Connections

System and Power Connections

The HK 3470 is designed for flexible use with external control components and power ampli- fiers. These connections are easy to make dur- ing an initial installation, or at a later date should you choose to upgrade your system.

Remote Control Extension

If the receiver is placed behind a solid or smoked glass cabinet door, the obstruction may prevent the remote sensor from receiving com- mands. In this event, an optional remote sensor may be used. Connect the output of the remote sensor to the Remote IR In jack ¢.

If other components are also prevented from receiving remote commands, only one sensor is needed. They may use this unit’s sensor or a remote eye by running a connection from the Remote IR Out jack ∞ to the Remote In jack on Harman Kardon or other compatible equip- ment.

External Audio Power Amplifier Connections

If desired, an optional, external amplifier may be used in place of the HK 3470’s internal power amplifier.

To connect an external power amplifier, first remove the Pre-Out/Main-In Jumper Pins

›that connect the Preamp Out fi and Main In ‹ jacks on the rear panel. Keep the jumpers in a safe place should they be needed at a later time.

Using high-quality audio interconnect cables, connect the Preamp Out jacks fi to the input jacks on your power amplifier. Make certain to match the right output to the right input and the left output to the left input.

Note that when an external power amplifier is used, no special adjustments are required. All volume and other control adjustments are made using the standard front panel or remote controls.

If you wish to use external processing equip- ment, such as an equalizer, you may connect the device to the preamp-out and main-in jacks by removing the Preamp-Out/Main-In Jumper Pins › and connecting the Preamp Out fi jacks to the inputs of the external device, and the outputs of the device to the Main In ‹ jacks.

Alternatively, you may connect the external device to the Tape Monitor Loop. Connect the Tape Monitor Record/Out jacks ‚ to the inputs of the external device, and connect the outputs of the device to the Tape Monitor Play/In jacks ª.

AC Power Connections

The Accessory Outlets · receive power as long as the receiver is turned on. Power to these outlets is removed when the unit is in the Standby mode, or when the Main Power Switch 1 is in the “OFF” position.

Speaker Placement

For optimal listening enjoyment, and for sound- field reproduction that best re-creates the origi- nal recording, it is good practice to place the speakers so that they form a triangle with the speakers at the front of the room, and the pre- ferred listening spot at the third point of the tri- angle. The distance between each speaker and the listener should be identical.

For example, if the speakers are 10 feet from one another, each of the speakers should opti- mally be placed so that they are also 10 feet from the listener. It is also desirable to place speakers so that their tweeters, or high- frequency drivers, are aimed at ear height when you are seated in the listening position.

Left Front

Right Front

Speaker

Speaker

A good starting point for speaker placement is to make the distance between the two speakers and the distance between either speaker and the listener identical.

To optimize the sound field, or to suit your lis- tening room environment, you may find that some experimentation is required to find the correct location. Ideally, pans from left to right across the front of the room should sound smooth, and instruments should appear to be coming from the proper location within an orchestra.

The placement of subwoofers should be done as suggested in the manufacturer’s instructions. In general, subwoofers often produce best results when they are placed in the corner of a room, along the same wall as the speakers, but optimal placement will vary widely depending on room size, the subwoofer type and the placement of rugs and furniture in a room. It may be helpful to temporarily position the sub- woofer in the usual listening position, then walk around the room while program material is playing until the bass reproduction sounds best to your ears. That location is likely to be the optimum position for the subwoofer.

Finally, when all connections are complete, plug the power cord into a nonswitched 120-volt AC wall outlet. You’re ready to enjoy the HK 3470!

13INSTALLATION AND CONNECTIONS

Page 12 Page 14
Page 13
Image 13
Harman-Kardon HK 3470 System and Power Connections, Remote Control Extension, External Audio Power Amplifier Connections
Page 12 Page 14

HK 3470 specifications

The Harman-Kardon HK 3470 is a versatile stereo receiver that combines pristine sound quality with a plethora of features designed for audio enthusiasts. Known for their commitment to high-fidelity sound, Harman-Kardon has engineered the HK 3470 to deliver an exceptional listening experience, whether for music, movies, or gaming.

One of the standout features of the HK 3470 is its powerful amplification capabilities. With 120 watts per channel, this receiver can easily drive a variety of speakers, allowing users to enjoy dynamic and clear sound across a wide range of volumes. This amplification is supported by Harman-Kardon's advanced circuitry, which minimizes distortion and enhances audio clarity, creating an immersive listening environment.

The HK 3470 comes equipped with multiple audio inputs, including five line-level inputs, a dedicated phono input for vinyl enthusiasts, and digital inputs for modern devices. This variety allows users to connect their favorite sources, from smartphones and tablets to CD players and turntables, ensuring compatibility with any audio setup. Additionally, the receiver features an FM/AM tuner with a large number of presets, enabling easy access to different radio stations.

In terms of technology, the HK 3470 utilizes Harman-Kardon's proprietary technologies such as the Quadruple Power Supply, which enhances performance during dynamic audio playback. Additionally, the receiver includes a remote control, making it user-friendly and convenient for adjusting settings from a distance.

The aesthetic appeal of the HK 3470 should not be overlooked. Its sleek design, featuring a brushed aluminum front panel and distinct display, adds a touch of sophistication to any audio system. The easy-to-read LCD screen provides essential information, such as input selection and volume levels, further enhancing the user experience.

Overall, the Harman-Kardon HK 3470 is an impressive stereo receiver that caters to audiophiles looking for high-quality sound and versatility. With its robust amplification, generous connectivity options, and elegant design, it stands as a reliable choice for anyone wanting to elevate their audio experience. Whether for casual listening or intense audio playback, the HK 3470 delivers a performance that truly resonates with users, capturing the essence of music and sound in a captivating manner.
Top Page Image Contents