Harman-Kardon HKTS 18 SUB-TS18 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS

SUB-TS18 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS

¡Subwoofer-Level Control: Volume

may be adjusted using the Subwoofer-

Level Control.Turn the control clockwise

to increase the SUB-TS18’s volume,or

counterclockwise to decrease it.

™High-Cut (Low-Pass) Filter Switch:

Placing this switch in the ON position acti-

vates circuitry that cuts out all audio input

signals above 120Hz, allowing the SUB-TS18

to focus its power on reproducing the low-

frequency portion of the signal, avoiding

inefficiency and distortion. Engage this filter

when using the Speaker-Level Inputs ª,

or when using the Line-Level Full-Range

Inputs ¶, unless your receiver or processor

processes its line-level output using a low-

pass filter. The filter has no effect when the

SUB Input §is used.

£External Trigger Input: Use the sup-

plied mini-plug cable to connect the trigger

output of another product to this jack. When

a trigger signal between 3 and 30 volts (AC

or DC) is detected, the SUB-TS18 amplifier

will turn on, even when the audio-sense

feature has been activated by placing the

Audio-Sense On/Off Switch ¢in the

AUTO position. The amplifier will remain

on for about 10–15 minutes without a

trigger signal.

¢Audio-Sense On/Off Switch: When

placed in the AUTO position, and when the

Master Power Switch ‚is turned on, the

SUB-TS18 will automatically turn itself on or

¡Subwoofer-Level Control

™High-Cut (Low-Pass) Filter Switch

£External Trigger Input

¢Audio-Sense On/Off Switch

∞Phase Switch

§Line-Level Subwoofer (SUB) Input

¶Line-Level Full-Range Inputs

•Speaker-Level Outputs

ªSpeaker-Level Inputs

‚Master Power Switch

⁄AC Power Cord

HKTS 18 OM 10/6/06 1:34 PM Page 5