Harman-Kardon HKTS 2 Front Left, SUB/LFE Out Receiver, SUB-TSSubwoofer, Front Right

Models: HKTS 2

1 16

Page 9

Speaker Connections

Use this installation method if your receiver/ processor has a dedicated LFE subwoofer out- put.

Use the line-level input jack marked "SUB" for the Low-Frequency Effects channel. Connect this jack to the LFE output or subwoofer output

on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure that you have configured your surround-sound processor for “Subwoofer On.” The left and right speakers should all be set to “Small.”

Left

–+

Front Right

–+

LINE LEVEL IN

SUB R L

Out

Receiver

SPEAKER CONNECTIONS 9

Image 9

Contents

HKTS 2 Home Theater & Music Speaker System Declaration of Conformity Table of ContentsTypographical Conventions We, Harman Consumer Group InternationalIntroduction Description and FeaturesIntroduction IncludedSpeaker-LevelInputs , or when using the Subwoofer-LevelControl VolumeWhen the Trigger On/Off Switch is in the When the Master Power Switch is turnedRear Panel Connections insteadREAR PANEL CONNECTIONS Color-CodingSystem Speaker PlacementFront Speakers SubwooferWall-Mounting Mounting OptionsSpeaker-LevelConnection Guide Speaker ConnectionsSUB/LFE Out Receiver Front LeftFront LeftSUB/LFE SUB-TS Subwoofer Line-Level R LReceiver IMPORTANT Do not use the Sub Input onReceiver SUB-TS SubwooferDolby* Pro Logic* Non-Digital- Speaker Level Front LeftAdditional Bass Adjustments Volume1. When the Sub Input OperationIf there is low or no bass output TroubleshootingHKTS System SpecificationsSAT-TS Satellites SUB-TS SubwooferImportant Safety Instructions Part 406-000-05513-E Harman Consumer Group International