2-Series

User Manual

Since the 2-Series Equalizers consume a relatively small amount of power, the units may be left on continuously.

Section 4 - Rear Panel Descriptions

s

131s- Single Channel 31 Band Graphic EQ

s

215s- Dual Channel 15 Band Graphic EQ

s

231s- Dual Channel 31 Band Graphic EQ

Power Cord Receptacle

Connects AC power to the equalizer.

Output Connectors

Two types of output connectors are provided for output connections: male XLR type connectors, and 1/4" tip-ring-sleeve phone jack connectors.

Input Connectors

Two types of input connectors are provided for input connections: female locking XLR type connectors, and 1/4" tip-ring-sleeve phone jack connectors. The maximum input level that the equalizer can accept is typically +22 dBu (ref: 0.775Vrms).

Section 5 - Installation Considerations

Hookups and Cabling: The 2-Series Equalizers are designed for nominal +4 dBu levels. The equalizers can be used with either balanced or unbalanced sources, and the out- puts can be used with either balanced or unbalanced loads, provided the proper cabling is used.

9

Page 9
Image 9
Harman not available user manual Rear Panel Descriptions, Installation Considerations