Assembly
Blower
The blower slides into the channel bracket on the rear of the stove as shown at right. Plug the blower into a properly grounded receptacle.
Shaker Handle
The shaker handle installs onto the shaker handle mount using the two
Firebricks
The SF250 uses 14 “standard” firebricks, as shown below. These standard firebricks measure 9” X 4½” X 1¼” each. The firebricks are already installed in the stove but can be removed to lighten the stove for moving. The doors can also be removed by simply lift- ing them off of the hinges.
Firebrick Diagram
