Manuals / Harman Stove Company / Household Appliance / Stove

Harman Stove Company Super Magnum Coal Stoker Stove owner manual Optional Door Trim Kit

Models: Super Magnum Coal Stoker Stove

1 40
Download 40 pages 35.17 Kb
Page 18
Image 18

Super-Magnum Coal Stoker Stove

F. Optional Door Trim Kit

The door trim kit includes a brushed stainless frame for each door, and an air grill. To install the optional door trim, you'll first need to remove the latch mechanism from the door. The process is the same for each door.

1.Using a hex key wrench, loosen the set screw at the latch. Remove the latch pin and latch handle.

2.Remove the door from stove. Lay the door face down on a soft material.

3.Locate the four drill dimples on the inside corners of the door. Using bit supplied (1/4”), drill a hole through each corner. (two locations on ash door)

4.Insert the door trim studs through the holes. Using a nut driver, secure with the supplied nuts. These nuts are placed on the stud with the indented triangle side facing up. Before tightening the nuts, check that the frame is properly nested into the offset of the door. Do not over-tighten nuts. The frame may distort or the stud can break loose from the frame if over-tightened.

5.Place door back on the stove. Attach the latch by reversing Step 1.

Set Screw

Locking nuts

To Install the air grill, remove the existing painted grill. Then, using the same two screws and spring washers, install the brushed stainless grill.

G. Room Sensor Installation

Although not required, it is recommended that the room sensor be connected in every installation. Using a minimum size 18 gauge wire, you may splice in an additional length, to extend the room sensor. The following are typical locations for the room sensor;

•On an interior wall next to or in place of a typical wall thermostat.

•On the leg of a coffee table or end table in your favorite sitting location.

•Dangled behind the stove, hidden from view, acting as a return air sensor.

Note: When installing the room sensor, limit the distance from the stove to 25 feet or less.

Once the location has been decided, run the wiring to the rear of the stove. Crimp the two female terminals onto the ends of the wires and plug them in to the port provided on the right rear portion of the stove. These connections are not polarity specific.

Note: If the room sensor is located too close to the appliance, or in a direct path of the distribution air, You may need to elevate the temperature setting to maintain a comfortable temperature level throughout the heated space.

Room Sensor attaches on rear of stove.

18 Do Not Burn Wet Coal!

3-90-02702R4_08/12

Page 17 Page 19
Page 18
Image 18
Harman Stove Company Super Magnum Coal Stoker Stove owner manual Optional Door Trim Kit, Room Sensor Installation
Page 17 Page 19

Super Magnum Coal Stoker Stove specifications

The Harman Stove Company Super Magnum Coal Stoker Stove is a remarkable heating solution that combines efficiency, reliability, and advanced technology to provide optimal warmth for your home. This stove is specifically designed to burn anthracite coal, a high-quality fuel that offers many advantages in heating.

One of the main features of the Super Magnum is its impressive heat output. It is capable of producing an astounding 140,000 BTUs per hour, making it suitable for larger spaces and even whole-home heating. This powerful output ensures that your environment stays warm and comfortable, even on the coldest winter nights.

The construction of the Super Magnum is another highlight. Built from high-quality steel, it is designed to withstand the rigors of continuous use. The stove features a large ash pan, which simplifies the maintenance process. With its easy-open access, homeowners can replace the ash quickly, ensuring that the appliance operates smoothly and efficiently.

In addition to its durable build, the Harman Super Magnum utilizes cutting-edge technologies to enhance performance. One of these technologies is the TWICE® System, which manages the internal combustion process to maximize heat output while minimizing emissions. This advanced system helps in maintaining a clean burn, making it an environmentally friendly option compared to traditional wood-burning stoves.

The stove also features a unique stoker system that automatically feeds coal into the burning chamber. This automated process not only ensures consistent heating but also reduces the need for constant monitoring. Users can set the desired temperature, and the stoker will adjust the fuel supply accordingly, allowing for a hassle-free heating experience.

Additionally, the Super Magnum is equipped with an integrated blower system that helps distribute warmth evenly throughout the space. The adjustable blower allows for customization based on the space's needs, ensuring that every corner of your home is comfortably heated.

Overall, the Harman Stove Company Super Magnum Coal Stoker Stove stands out as a powerful and technologically advanced heating solution. With its robust construction, impressive BTU output, automatic fuel feeding system, and advanced combustion management, it is an excellent option for those looking to efficiently heat their homes using coal. The Super Magnum not only provides comfort but also peace of mind, knowing that you have a reliable heating source ready to take on the cold season.