Exception TL200 Wood Stove

Venting

The Chimney

The Exception must be installed into a chimney approved for use with solid-fuel appliances. In the U.S., the Exception must be connected to (1) a prefabricated chimney complying with the requirements for Type HT chim- neys in the Standard for Chimneys, Factory-Built, Resi- dential Type and Building Heating Appliances, UL 103, or

(2)a code-approved masonry chimney with a flue liner. In Canada, the Exception is listed for use with prefabricated chimneys tested and listed to the high temperature (650 degrees C) chimney standard, ULC S-629, or with a code approved masonry chimney. For mobile homes, the Ex- ception must only be installed with prefabricated chimney systems, including the installation components, tested to either UL 103 or ULC S-629 which have been approved for use in mobile homes; the diameter should match the di- ameter of the flue collar opening.

The minimum recommended height for any chim- ney is 16 ft (4.8 m) above flue collar height. For non- mobile home installations, a round flue (either masonry or approved prefabricated), of either 6" (150 mm), 7" (180 mm) or 8" (200 mm) may be used. For square or rectangular masonry chimneys, nominal sizes of 8" x 8" or 8"x 12" (200 mm x 200 mm, 200 mm x 300 mm) may be used.

Codes require that solid-fuel chimneys extend 3 ft (0.9 m) above the point at which they exit from the roof, provided that no part of any structure is within the top of the chimney, then the chimney must extend 2 ft (6 m)

above the highest point with the 10 ft (3 m) radius top height. If there is not ten feet of clearance from the top of the chimney, then the chimney must extend 2 ft (6m) above the highest point within the 10 ft (3m) radius.

Do not connect this unit to a chimney flue servicing another appliance.

NOTE: The restriction of not venting more than one appliance to the same flue applies to the U.S. specifically. While it is not recommended that you use the same chim- ney for more than one appliance, in Canada certain ex- ceptions may be made. Be sure to contact your building code inspection official to see if this option is allowed in your area, and to find out the specific requirements for such an installation.

18

Page 17 Page 19
Page 18
Image 18
Harman Stove Company TL200 manual Chimney
Page 17 Page 19

TL200 specifications

The Harman Stove Company TL200 is a standout pellet stove designed to deliver both efficiency and elegance to any home. Recognized for its robust construction and advanced features, the TL200 is a popular choice among homeowners looking to maximize heat while minimizing environmental impact.

One of the main features of the TL200 is its high-efficiency pellet burning capability. The stove boasts an impressive EPA certification, which means it meets strict environmental standards for emissions. This is essential not only for regulatory compliance but also for residents who are mindful of their carbon footprint. The stove efficiently converts pellets into heat, with low emissions that contribute to cleaner air quality.

The TL200 incorporates innovative technology to ensure optimal performance. It comes equipped with an intuitive digital control panel, allowing users to easily adjust the heating output according to their needs. This feature is complemented by an automatic igniter that takes the hassle out of starting the stove. With a programmable thermostat, homeowners can maintain their desired temperature effortlessly, leading to energy savings and enhanced comfort.

Another notable characteristic of the TL200 is its large hopper capacity. The stove is designed to hold a substantial amount of pellets, providing extended burn times. This means less frequent reloading, allowing for uninterrupted heating during those cold winter months. The TL200 can burn for up to 48 hours on a single load, making it an excellent choice for both convenience and efficiency.

The design of the TL200 is another aspect that sets it apart. It combines traditional aesthetics with modern functionality. The stove features a sleek, contemporary look, available in various finishes to complement any décor. The large viewing window allows users to enjoy the beauty of the flames while providing adequate heat to the room.

Safety features are also paramount in the TL200 design. The stove includes a built-in safety sensor that monitors temperature levels, ensuring that the unit does not overheat. An automatic shutoff feature provides peace of mind for homeowners, making it a safe option for families.

In conclusion, the Harman Stove Company TL200 pellet stove stands out for its eco-friendly burning technology, user-friendly controls, ample fuel capacity, attractive design, and safety features. For those seeking a reliable and efficient heating solution, the TL200 is an impressive option that combines performance with style.
Top Page Image Contents