Harmar Mobility AL003 manual Hitch Adapter Installation, Bumper Mount

Hitch Adapter Installation

Bumper Mount	CLASS 1	CLASS 3
	( Flat Bar Style )	( 2 x 2 TUBE )

( Be sure to comply with vehicle's bumper rating )

Refer to diagram below
for proper orientation	CLASS 2
( right side up or upside down )
	( 1.25 x 1.25 Solid Bar )
Determines carrier's height
from the ground

Omit stabilizer

Do not attempt to

mount up from under

DETERMINE BEST MOUNTING HEIGHT

Harmar recommends maintaining 8-12" of ground clearance from the bottom of the unfolded platform, while not exceeding 45 degrees of tilt ( 12" off the ground )

To achieve this, a number of mounting options are available.

	REMOVE,
	MOVE UP,
AS SHIPPED	RE-ATTACH

8-12"45max

REMOVE,	REMOVE,
FLIP,	FLIP, MOVE UP,
RE-ATTACH	RE-ATTACH

Measure from Hitch Bar to ground		12-16"	14-18"
	8-12"	10-14"

ORIENTATION OF CLASS 2 and CLASS 3 HITCH ADAPTERS IS IDENTICAL

	NOTE:
OR	IF FLIPPING HITCH ADAPTER FOR BETTER HEIGHT,
	BOTH PARTS MUST BE FLIPPED TOGETHER.
	ORIENTATION OF THESE PARTS IS IMPORTANT
	FOR THE TILT AWAY FEATURE LIMITS.