(5.2.1 Disassembly, Page 21)

Disassembly Procedures

Remarks

 

 

1. Remove the split pin [48], slotted nut [45], spring holder

See parts list for part names,

[55], collar [53], free knob [50], brake spring [54], and

figure numbers and assembling

cam guide [52] from the pinion [28].

positions.

 

 

(5.2.1 Assembly and Adjustment, Page 28)

 

 

 

Assembly Procedures

Remarks

 

 

9. Place the collar [53] inside the free knob [50]. Mesh

If it is difficult to line up with the

the spring holder [55] with the pinion [28] splines and

split pin hole, fully tighten the nut

thread the slotted nut [45] onto the pinion, fixing it with

first, then back it off slightly and

a split pin. (See figure 30)

put the split pin in.

Fig. 30

10. (not required for Boeing versions of the L4LB)

 

GENERAL USE

3 of 4

EDOC0161

Rev. 0 May 16, 2000