Harrington Hoists MR2, TS2 6.5Load Chain

6.5Load Chain

6.5.2After chaining a unit, be sure to clean any exposed portions of bottom yoke bolts that have been treated with thread locking compound. Conduct a thorough inspection of these bolts after torquing to ensure there is no excess thread locking compound on the exposed portions. Failure to do so could affect the hoist’s compliance with the application’s food grade requirements.

Contents

Page IMPORTANT INFORMATION ON HOW TO USE THIS MANUAL Main Table of Contents IConformance Clarification Statement IINER2 Electric Chain Hoist 1.0Important Information and Warnings ……………………………………………………………..…….ER2OM 1.1Terms and Summary 1.2Warning Tags and Labels 2.0Technical Information…………………………………………………………………………...……………6 6.0Maintenance & Handling ……………………………………...…………………………………………ER2OM 6.1Count/Hour Meter 6.2Lubrication – Load Chain, Hooks and Suspension………………………..….8 and ER2OM 6.3Lubrication – Gearbox…………………………………………………….....…..8 and ER2OM 6.4Motor Brake Page Table 2-2Hoist Dimensions Figure 2-1 Single Speed Hoist Dimensions Figure 2-2 Dual Speed Hoist Dimensions 6.2Lubrication – Load Chain, Hooks, and Suspension 6.2.1Load Chain •For longer life, the load chain should be lubricated Figure 6-2 Chain Grease Application 6.2.2Hooks and Suspension Components REPLACING OIL Table 6-6Amount of Gear Oil Capacity Code Quarts Liters 6.5Load Chain III MR2 Motorized Trolley 1.0Important Information and Warnings………………...……………………………………….....….MR2OM 1.2Warning Tag and Labels 2.0Technical Information…………………………………………………….………….…………………..….13 3.0Pre-operationalProcedures..……………………………………………………………................MR2OM 6.0Maintenance & Handling……………………………………………………………………………..MR2OM 6.1Count/Hour Meter (Dual Speed Only) 6.2Lubrication……………………………………………………..………………..14 and MR2OM 6.3Brake 6.4Storage 2.0Specifications Table 2-1Trolley Specifications 6.2Lubrication IV TS2 Manual Trolley 1.0Important Information and Warnings………………….………………………………………….TS2OM 2.0Technical Information …………………………………………….………………….……..........…… 2.3Optional Equipment 3.0Pre-operationalProcedures…………………………………………………………………….... TS2OM 6.0Maintenance & Handling………………………………………………………………………….. TS2OM 6.1Lubrication……………………………………………………….……………….19 and TS2OM 6.2Storage 6.3Outdoor Installation 7.0Warranty…………………………………………………………………………………………..…TS2OM Product Code for TS2 Trolley Alone: Temperature Range: -4°to +104°F (-20°to +40°C) Humidity: 85% or less Table 2-1PTS2 Trolley Specifications Table 2-2GTS2 Trolley Specifications Table 2-3PTS2 Trolley Dimensions Table 2-4GTS2 Trolley Dimensions 6.1Lubrication Page V Parts List 1.1 Housing and Motor Parts Page Page Page 1.2 Gearing Parts Page Page Page 1.3 Hook and Chain Parts Figure 3-1Hook and Chain Parts Page Figure 3-2Hook and Chain Parts Page Figure 3-3Hook and Chain Parts Page 1.4 Electric Parts (Single Speed) Electric Parts (Single Speed) 1.5 Electric Parts (Dual Speed) Page 1.6 Power Supply and Pendant Parts Page Page Section 1/4 to 2 Ton 2.1 Electric Parts – 1/4 to 2 Ton (Single Speed) 2.1 Electric Parts– 1/4 to 2 Ton (Single Speed) Name Plates for 1/8, 1/4, 1/2 & 1 1/2 Ton Capacities 2.1 Electric Parts – 1/4 to 2 Ton (Dual Speed) 2.1 Electric Parts– 1/4 to 2 Ton (Dual Speed) 2.2 Pendant Parts – 1/4 to 2 Ton Page 2.3 Power Supply Parts – 1/4 to 2 Ton *A/R = As Required, one for every 5 ft of power Supply Cable 2.4 Side Plates and Suspension Parts – 1/4 to 2 Ton 2.4 Side Plates and Suspension Parts– 1/4 to 2 Ton Extended Suspension Shaft Assemblies Page 2.5 Motor Parts – 1/4 to 2 Ton Page Page 3.0 TS2 Parts List TS2 Series Nameplate Section ½ to 2 Ton 3.1 TS2 Push Trolley Parts – 1/4 to 2 Ton *Quantity is 1 for 2 Ton 3.2 TS2 Geared Trolley Parts – 1/4 to 2 Ton Quantity is 1 for 2 Ton **For ¼ and ½ Ton capacities, Name Plate B will be relabeled at the factory www.harringtonhoists.com