NOTE: To take the FLASH ART Neon Paint Spinner out of demo
mode, press either the 
or buttons while the spinner is on (you will need to do this within the first 6 seconds the spinner is on). Each time you replace the batteries, you will need to repeat this step.
BASICS
There are all kinds of amazing designs you can make with the FLASH ART Neon Paint Spinner toy! Here are a few basics you’ll need to follow before you begin to create:
1. Secure a design card onto the
spinner platform as shown. Make sure all four corners are in place.
2. Press the button once to start the spinning action! You’ll want to turn off the lights in your room to get the full glowing effect!
(first time playing: SEE NOTE)
3. Drip paint onto the spinning design card. When finished,
press the button once or twice to turn the paint spinner off.
GETTING CREATIVE
Once you have a feel for using the paints on your design cards, you’ll want to experiment with different paint colors and strobe patterns to create different effects. Here are a few play suggestions:
1. Once spinning, you can press the | button to control the |
strobe patterns. Press the | button to shuffle through all of |
the strobe patterns. |
|
2. Press the 
button once to shut off the music; press it a second time to change the music.
