Web Blaster Assembly & Use: | Note: Clear nozzle of any excess string for best performance. For best results aim slightly upwards. |
1
Rotate nozzle tab to opposite side of red dot on can.
2Push Lock Button in and pull out Rear Clamp.
Load can into Blaster Housing
3with nozzle tab facing down. Make sure silver collar is in
front of Holding Clip.
4Push in Rear Clamp and push Lock Button.
5 | Pull trigger to shoot web. |
Hover Jet can also use Dart Launcher and Water Canister from the GATLING DART BLASTER & SONIC WEB BLASTER (each sold separately).
WARNING: Contents Under Pressure.
Do Not Puncture Or Incinerate.
Do Not Expose to Heat or Store at Temperatures above 120° Degrees F / 48 Degrees C.
•Do Not Spray on Open Flame or Any Hot Stoves or Light Bulbs.
•Do Not Leave in Direct Sunlight or Store in a Hot Vehicle.
•Heat Can Cause Can to Burst Violently.
•Do Not Spray in Eyes or Face.
•Do Not Ingest String.
Shake well before using. Can should be used in a horizontal position.
Adult Supervision Required.
Not Recommended for Indoor Use.
CAUTION: Do not spray on walls, floors, clothing, furniture or vinyl as string may stain certain types of surfaces and fabrics.
USE ONLY AS DIRECTED.
Ingredients: Water HFC 134a (propellant), Acrylic Resin, Hydrocarbon solvents, Light oil, Pigment.
*
| Product and colors may vary. |
|
| ||
| 2007 Columbia Pictures Industries, Inc. All rights reserved. | |
| www.marvel.com |
|
| ®* and/or TM* & © 2006 Hasbro. All Rights Reserved. | |
® | TM & ® denote U.S. Trademarks. | P/N: 6663810000 |
www.hasbro.com | ||
